Jaypro Sports BLCH-1021GR - Manual (Page 4)

© 2009 Jaypro Sports Equipment JSL-Inst036 Rev C 06-05-2009 4 of 12
a) Assemble Understructure:
b)
1) Assemble the lower 5-Row frame. Lay out 3 or 4 of the 5-row frames (1) roughly 6 ft
apart. Attach the 76” cross-bracing (4) to the third row vertical of each frame using the
hardware shown in Detail 1A. Attach the 80” cross-bracing (2) to the rear support member,
using the top and bottom holes. Use hardware as shown in Detail 1B (tighten hardware only
finger tight until entire base frame is assembled).
DETAIL 1B
DETAIL 1A
3/8”-16 x 2” HEX HD CAP SCREW, ZP (15)
3/8”-16 FLANGE HEX NUT, ZP (13)
3/8”-16 FLANGE HEX NUT, ZP (13)
3/8”-16 x 1-1/4” HEX HD CAP SCREW, ZP (16)
1B
1A
1A
5-ROW BLEACHER LEG (1)
X-BRACE x 76” L, 3 RD ROW (4)
X-BRACE x 80” L, 5 TH ROW (2)