Jaypro Sports PBEL96 - Manual (Page 24)

ELITE Series Adjustable Portable Backstop Instructions
- 20 of 27-
JSL-Inst039
www.jayprosports.com
Figure 9-12: L-Clips fastened to the front pad.
c. Place the rear of the front pad against the front of the base
frame with the clips above each of the front horizontal 2x4’s.
d. Slide the pad downward until the L-Clips are ftted securely
over the top 2x4.
e. Secure the front pad to the bottom front 2x4 with two u-
brackets.
5. Install the top pad (PBEL66/PBEL96) 6 :
a. Slide the top pad into the space between the tops of the
front and side pads. Be sure to orient the notches over the
foot adjusters (hex heads).
6. Install the upright pads:
a. Fasten the upright pad to the front using the hook-and-loop
straps.
6 There is no top pad for the PBEL54.