7 unpacking – Jaypro Sports PBEL96 User Manual
Page 16
ELITE Series Adjustable Portable Backstop Instructions
- 12 of 27-
JSL-Inst039
www.jayprosports.com
7 Unpacking
WARNING: DO NOT REMOVE SAFETY STRAP OR QUICK-RELEASE PIN UNTIL THE BACKBOARD
AND RIM HAVE BEEN INSTALLED. FAILURE TO COMPLY MAY RESULT IN SEVERE OR FATAL
INJURY AS WELL AS SIGNIFICANT DAMAGE TO SURROUNDING STRUCTURES.
1. ONLY IF BACKBOARD HAS BEEN INSTALLED, remove quick-release pin
from height adjuster mechanism (Figure 7-1).
Figure 7-1: Height adjuster mechanism
2. Carefully remove shipping strap by pressing on the buckle release.
a. Pay extra attention when removing the strap to make sure
that the backstop does not begin to rise on its own. If it does,
retighten strap, reinstall the quick-release pin and refer to
section 12 for details on how to adjust the springs
5
.
b. If the unit does not rise on its own (indicates that springs are
correctly adjusted), reinstall the quick-release pin to lock in
the storage position or refer to section 11 for instructions on
how to raise the backstop.
3. Remove all the protective wrapping from the frame. Be careful to
not scratch the powder-coated finish if using a box-cutter or other
sharp object.
5
Spring tension is preset at factory. Under normal circumstances, spring adjustment is not
typically necessary.