Jaypro Sports BBC-SPDKT - Manual (Page 7)

Rev - B Page 7 of 13
6) Make up the 72, 1/8” suspending cables, as shown in Figure 5. The overall length
(from thimble to thimble) is determined by taking the height of the support cables
and subtracting 12” less than the height of the net. Example: If the support cables
are at 20 ft above the floor and the net is 12 ft high, make the suspending cables 9
ft long (20 ft minus 11 ft). (see step 3). Tighten the cable clamps using a 5/16”
nut driver.
Figure 5: Assemble Suspended End Loops
7) Attach one end of each suspending cable to one of the support cables using the
1/4” x 2 3/8” snap hook. There will be 24 suspending cable on each support cable.
Figure 6: Attaching 1/8” Suspended End Loops To Support Cable
8) Roll out net under the suspended cables, spreading it out flat. Center the net
between the end cables.