Jaypro Sports BBTFSM-70 User Manual
Page 2
Rev:-
Page 2 of 10
JAYPRO SPORTS
OUTDOOR SURFACE MOUNT BATTING TUNNEL FRAMES 55 FT / 70 FT LONG CAGE
ITEM
PART #
DESCRIPTION
BBTFSM-55
BBTFSM-70
1
BBTW-ASM
SURFACE MOUNT UPRIGHT
8
10
2
BBTF-B
WICKET FRAME CROSSBAR
4
5
3
HM6275
3/8"-16 TURNBUCKLE, JAW TO JAW
3
3
4
HM5013
STEEL SPRING CLIPS
9
12
5
HB5048
3/8"-16 x 3" LONG THREADED EYEBOLT, ZP
12
15
6
HW2050
3/8" FLAT WASHER, ZP
24
30
7
HM218
3/16" CABLE CLAMP
12
12
8
HM251
3/16" THIMBLE
6
6
9
HS2663
#12-14 SELF-DRILLING SCREW, ZP
20
24
10
RC5012
3/16" GALV. CABLE x 61' / 76'
3
3
11
RP5013
8 1/2" ZIP TIES HEAVY DUTY
200
300
12
HN265
3/8"-16 NYLON LOCK HEX NUT, ZP
12
15
13
HB5094
1/2"-13 x 12" HEX HEAD BOLT, ZP
32
40
14
HN2951
1/2"-13 NYLON LOCK HEX NUT, ZP
32
40
15
HW2044
1/2" FLAT WASHER
32
40
IMPORTANT NOTICE:
1)
BEFORE EACH USE CHECK EQUIPMENT FOR PROPER CONNECTING
HARDWARE AND STRUCTURAL INTEGRITY. REPLACE DAMAGED OR
MISSING HARDWARE IMMEDIATELY.
2)
USE OF THIS EQUIPMENT OTHER THAN INTENDED, MAY BE HAZARDOUS.
3)
ALTERATION OR MODIFICATION OF THIS EQUIPMENT MAY BE
HAZARDOUS AND RESULT IN INJURY. FOR REPAIR OR REPLACEMENT,
CONTACT YOUR DEALER OR JAYPRO SPORTS.
4)
CAUTION: DO NOT OVER TIGHT THE CABLES, AS THE END FRAMES WILL
UNDERGO EXTREME BENDING - SOME AMOUNT OF SAG WITHIN THE NET
IS EXPECTED.
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED:
(1)
7/16” Nut Driver
(1)
5/16” Nut Driver
(1)
9/16” Box Wrench
(1)
Electric drill w/ Phillips head
(1 or 2) 12 FT Stepladder(s)
•
Unpack all parts and check against parts list to ensure that all have been included.
•
Inspect all parts for damage. Report any damages to the trucking company.