Jas-Audio PLATO User Manual
Page 7
For those reasons, please choose the best location as final placing position before starting the next precedence.
Now it’s time to attach the Plato base-unit. The setup procedure captured as following clips:
|
Neutral-position
|
4 Stand-poles screwing
|
Base unit & Phase Plug installed
|
Ready to couple
|
zip by a belt
|
After coupling the base-unit secured to the woofer-unit, be sure that the belt is well zipped. In addition,
insert a soft sheet of foam enclosure to the belt-connector to avoid scratching. Now, the final stage is
the most important setup procedure, which is to lift up (rotate 90°) and upside down “the
cake” safely without handles (see below pictures).
Í
Before
After up side down
Page 7 of 12
http://www.jas-audio.com