Jas-Audio PLATO - Manual (Page 6)

ATTENTION 3
The weight of the Plato woofer-unit makes movement difficult, especially on the rigid floor.
Be careful not to scratch the wood or tile floor by moving the speaker without installing the
[ Air-Cushion-Pads * ] (see upper left picture).
* Since the Plato base-unit is not only designed to place at carpeted floor, but also can be placed at wood or tile
floor. The solution is simple and optional, 4 pieces of self-adhesive [ Air-Cushion-Pads ] accessories are
necessary to attach at the bottom side corners of one base unit. Again, Plato accessories and parts are stored well
at the Plato Packing-Box-A (see below).
| Opened the Plato’s Packing-Box-A | Plato’s accessories (cable, tools, parts … …) show up | Well Prepared |
ATTENTION 4
Four sets of the Plato’s stand-poles and screws must be tighten by using a strong screwdriver inserted in
its lateral hole. Do not over tighten the screws when installing the poles. Doing so might risk
breaking the fixing holes. When un-installing the poles, hold the pole tightly so that it will not turn with
your unscrewing action.
Page 6 of 12
http://www.jas-audio.com