Jas-Audio PLATO - Manual (Page 3)

This modern stereo speakers’ system features a super tweeter, allows the high-
frequency-band and the high internal sound velocity features speedy and accurately
impulse response, which is important for a high breakup frequency point and extended
linear range. With selectable operation frequencies and levels control on this system
that produces extremely clean and quick transients as well as enormous soundstage both
in width and depth.
Moreover, the choice of ACCUTION ceramic series on tweeter, midrange and dynamic bass all ceramic
drive * units are diligently done in effort to allow seamless integration with our unique aluminum twin-
ribbon super tweeters. The result is yielding the lowest coloration and maximum tonal definition.
* “The ultra hard ceramic dome material moves like a piston well above the audible frequency band and the high
internal sound velocity features very low distortion and virtually no coloration” – quoted from www.accuton.com
By special order, Plato can be upgraded to use the cost-no-object ACCUTON diamond tweeter, which
membrane has a pure artificial diamond vibrating from 2 kHz to almost 100 kHz and shows harmonic
distortion magnitudes lower than conventional tweeters. The sound propagation in the diamond material
is almost 18,000 m/sec, the highest in any existing material.
____________________________________________________________________________________
These Plato extremely high quality speakers need careful installation.
Please read the assemble / installation instructions before unpacking the speakers,
the following pages should be carried out setup information in full,
and the mentioned precautions taken to get the expected result and to avoid damages!
____________________________________________________________________________________
Page 3 of 12
http://www.jas-audio.com