Intex CS20110 2014 - Manual (Page 8)

241
PO
(241PO) SALTWATER SYSTEM & SAND FILTER PUMP (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 07/18/2013
English
SAVE THESE INSTRUCTIONS Page 8
PRODUCT SPECIFICATIONS
SETUP INSTRUCTIONS
The sand filter removes suspended particles and sanitize your pool. Pool chemistry is a
specialized area and you should consult your local pool service specialist for details.
TOOLS REQUIRED: One (1) Phillips screwdriver
Pump location and mounting:
• The system must be installed on a solid level and vibration-free base.
• Provide a location protected from the weather, moisture, flooding and freezing
temperature.
• Provide adequate access, space and lighting for routine maintenance.
• Pump motor requires free circulation of air for cooling. Do not install the pump in a
damp or non-ventilated location.
A team of 2 or more people is recommended for setting up this product.
Motor pre-filtering assembly setup:
1. Remove the sand filter and its accessories from the packaging
carefully and inspect for any visible damage. For missing or
damaged parts contact the appropriate Intex Service Center
listed in the separate “Authorized service Centers” sheet.
2. In a counter-clockwise motion unscrew the leaf trap cover
(14) from the pre-filter housing. Take out the basket (16) and
filter housing nut (17) (see drawing 10).
3. Connect the pre-filter housing to the motor water inlet. Note:
Align the connector in the pre-filter housing with the water inlet
on the motor (see drawing 11).
10
11
14
17
16
41
Model: CS20110 CS15110
Power: 110-120 Volt AC 110-120 Volt AC
Amperage: Saltwater System - 1.1 A; Filter Pump - 6 A Saltwater System - 0.9 A; Filter Pump - 3 A
Wattage: Saltwater System - 120 W; Filter Pump - 650 W
Ideal Salt Level: 3000 ppm (parts per million) 3000 ppm
Maximum Sanitizer Output/hour: 11 grams/hour 7 grams/hour
Copper Ionizer Output Current: 175mA 175mA
Maximum working pressure: 2 bar (30 psi) 2 bar (30 psi)
Effective filtering area: 0.13 m 2 (1.44 ft 2 ) 0.1 m 2 (1.1 ft 2 )
Maximum Flow Rate: 8140 liters/hour (2150 gallons/hour) 6055 liters/hour (1600 gallons/hour)
Recommended filtering
media quantity: No. 20 silica sand 45 Kg (100 Lbs)
or glass sand 32 Kg (70 Lbs). No. 20 silica sand 25 Kg (55 Lbs)
or glass sand 18 Kg (40 Lbs).
Recommended filtering
media (Not included) : No. 20 silica sand or glass sand. Particle size range 0.45 to 0.85
mm (0.018 to 0.033 inches). Uniformity Coefficient less than 1.75.
Limited Warranty: see “Limited Warranty”