beautypg.com

Save these instructions, Pool care & chemicals, Maintenance (continued) – Intex CS20110 2014 User Manual

Page 27: Intex, Way test strips (packed with the product), Copper ion test strips (packed with the product)

background image

241

PO

(241PO) SALTWATER SYSTEM & SAND FILTER PUMP (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 07/18/2013

English

SAVE THESE INSTRUCTIONS

Page 27

POOL CARE & CHEMICALS

All pools require care to keep the water clear and hygienically clean. With proper chemical

control, your filter will help attain this objective. Consult your pool supply dealer for

instructions regarding the proper use of chlorine, algaecide and other chemical agents

required for sparkling clear water.

Keep pool chemicals away from children.

Do not replenish chemicals in pool while pool is occupied. Skin or eye irritations could

occur.

Daily pH checking and chemical treatment of the water is very important and cannot be

overemphasized. Maintenance of proper pH levels are required when filling the pool as well

as during the season. Consult your local swimming pool supply store for instructions.

The season's first filling of the pool may have brackish water requiring extra water additives

and extra filtering time. Do not allow swimming in pool until the pH level is balanced. Consult

your local swimming pool supply store for instructions.

Chlorinated water may damage lawns, gardens or shrubbery as children play in the pool

and splash water outside the pool. Lawn areas underneath the pool liner will be destroyed.

Note that some types of grass may grow through the liner.

Filter run time depends on pool size, weather and usage level. Experiment with various run

times so as to produce clean clear water.

MAINTENANCE (continued)

The 3-Way Test Strips can test the “Free Chlorine”, “pH”, and “Total Alkalinity” levels at the
same time. We recommend that you test the water chemistry weekly, and maintain the chlorine
concentration at 0.5-3 ppm.

Directions and Use
1
. Dip the entire strip into the water and remove immediately.
2. Hold the strip level for 15 seconds. Do not shake excess water from the strip.
3. Now compare the strip pad to the color chart on the packaging label. If necessary, adjust the

chemical level in the pool water. It is very important, to use the proper technique when

testing the water's chemical level. Read and follow the written strip instructions carefully.

INTEX

®

3-WAY TEST STRIPS

(PACKED WITH THE PRODUCT)

The Copper Ion Test Strips can be used to test the copper ion concentration in the water.

Directions and Use
1
. Dip the entire strip into the water for 3 seconds, then remove it.
2. Hold the strip level for 15 seconds. Do not shake excess water from the strip.
3. Now compare the copper ion strip pad to the color chart on the packaging label.

INTEX

®

COPPER ION TEST STRIPS (PACKED WITH THE PRODUCT)

This manual is related to the following products: