Canon DR-6030C - Manual (Page 36)

30 Using the Scanner
How to Feed with the Bypass Mode
1.
Move the feed selection lever on the lower left side of the front of the scanner
down (
).
Note
• Lowering the feed selection lever causes the document stoppers to go down.
• The ISIS/TWAIN driver settings change to the manual feed mode
automatically when the feed selection lever is lowered. (See “Feeding
Option,” on p. 83.)
2.
Place the document into the document feed tray one sheet at a time and adjust
the position of the document guides.
IMPORTANT
When scanning small or short documents, adjust the document guides 2 to the
edges of the documents.
3.
Start scanning from the application.
Document Stoppers