Canon DR-6030C - Manual (Page 20)

14 Before Using the Scanner
„ Rear
CAUTION
Do not block the ventilation openings. Doing so could cause the
scanner to overheat, creating a risk of fire.
„ Interfaces
CAUTION
Do not connect both a USB cable and a SCSI cable at the same
time. Doing so may cause a malfunction.
Document Eject Tray 2
Switch the direction
documents are eject by
opening or closing this tray.
(See p. 23 and p. 24.)
Interface
Ventilation Openings
Power Connector
Connect to the power cord.
Ventilation Openings
USB Connector
Connect the USB cable.
DIP Switches
Set the SCSI ID. (See “Step 4,
Connecting the Scanner to your
PC,” in the Easy Start Guide.)
SCSI Connector
Connect to a 50-pin half-pitch (pin type)
SCSI cable.