Curtis AR-B1682 User Manual

Page 49

~ Page 43 ~

Step 1:

Turn on your system and don’t detect the CONFIG.SYS and AUTOEXEC.BAT files.

Step 2:

Insert the FLASH BIOS diskette into the floppy disk drive.

Step 3:

In the MS-DOS mode, you can type the FLASH812 program.

A:\>FLASH812

Step 4:

Press [ALT+F], The box will show the following message, this message will be
highlighted.

BIOS Filename Loading … . After typing in the File name you must press or
press to exit.

Step 5:

And then please enter the file name to the box. And the
box will show the following notice.

Are you sure to write this BIOS into flash ROM?

Step 6:

Press the key to update the new BIOS.
Then the box will show the .

Step 7:

When the BIOS update is successful, the message will show Completed - Pass>.

NOTE: The BIOS Flash disk is not a standard accessory. Now that the onboard BIOS is updated to the
newest version, if you need to add some functions in the future please contact the technical support (FAE)
engineers. They will provide the newest known BIOS for update engineers. They will provide the newest known
BIOS for update.