5. power management – Curtis AR-B1682 User Manual

Page 42

~ Page 36 ~

4-5. POWER MANAGEMENT

This section is used to configure the power management features. This option
allows you to reduce power consumption. This feature turns off the video display and shuts down the hard disk
after a period of inactivity.

BIOS: Power Management Setup

Power Management /APM
Enabled this option is to enable the power management and APM (Advanced Power Management) features.

Green PC Monitor Power State
This option specifies the suspend mode of shutting down the cathode ray gun, if only the system is fixed a
green function monitor, the power saving function is available.

Video Power Down Mode
This option specifies the power management state that the video subsystem enters after specified period of
display inactivity has expired.

Hard Disk Power Down Mode
This option specifies the power management states that the hard disk drive enters after the specified period of
display inactivity has expired.

Hard Disk time out(minute)
This item is used to set up the initial value of the waiting timer .the Hard Disk will turn into the suspend
mode when the time is out if no operation applied to Hard Disk .

Standby Time Out (minute)
This item is used to set up the initial value of the waiting timer, the System will turn into the suspend mode
when the time is out if no operation applied to system.

MIBIOS SETUP - Power Management Setup

Power Management /APM

Disab led

Green PC Monitor Power State Off
Video Power Down Mode Disabled
Hard Disk Power Down Mode

Disabled

Hard Disk Time Out (Minute) Disabled
Standby Time Out (Minute)

Disabled

Suspend Time Out (Minute)

Disabled

Throttle slow Clock Ratio 25-37.5%
Modem Use IO Port 3F8h/COM1
Modem Use IRQ 3
Display Activity Ignore
Device 6 (Serial Port 1)

Monitor

Device 7 (Serial Prot 2)

Monitor

Device 8 (Parallel Port)

Ignore

Device 5 (Floppy disk) Monitor
Device 0 (Primary master IDE) Monitor
Device 1 (Primary slave IDE) Ignore
Device 2 (Secondary master IDE) Monitor
Device 3 (Secondary slave IDE) Ignore
System Thermal Ignore
Thermal Slow Clock Ratio 50-62.5%
CPU Critical Tempera ture 65 /149
Power Button Function On/Off
Restore on AC/Power Loss Last State
Ring Resume From Soft Off Disabled
Lan Resume From Soft Off Disabled

Available Options :

Disabled
Enabled

ESC:Exit

:Sel

PgUp/PgDn:Modify
F2/F3:Color