Cabletron Systems SEH100TX-22 - Manual (Page 46)

Appendix A: EPIM Information
A-2 SEH100TX User’s Guide
A.1.2 EPIM-100FX
The EPIM-100FX shown in Figure A-2 supports Multimode Fiber Optic
cabling. The EPIM-100FX is equipped with an SC style connector.
Specifications for the EPIM-100FX are listed in Table A-1.
Figure A-2 EPIM-100FX
The transmitter power levels listed above are peak power levels after
optical overshoot. A peak power meter must be used to correctly compare
the values given above to those measured on any particular port. If power
levels are being measured with an average power meter, add 3 dBm to the
measurement to compare the measured values to the values listed above.
Table A-1 Transmitter Power (EPIM-100FX)
Cable Type Worst Case Budget Typical Budget
50/125
µ
m fiber optic 6.0 dB 9.0 dB
62.5/125
µ
m fiber optic 9.0 dB 12.0 dB
100/140
µ
m fiber optic 15.0 dB 18.0 dB
EPIM 1 5X 4X 3X 2X 1X
16X 15X 14X 13X 12X
EPIM- 100FX
LNK
1510_10
EPIM 2