beautypg.com

Playback @), N n o – Philips CD 750/00B User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

PLAYBACK @)

NORMAL PLAYBACK

(PLAY/REPLAY)

NOTE! Use only audio CDs; no CD-ROM, CD-1 or CDV.

• Press POWER ON/STANDBY

1

to switch the player on.

- Open the CD compartment by pressing OPEN/CLOSE

10.

- OPEN

lights up.

• Insert an audio CD,

printed side up.

and close the compartment

CLOSE

lights up, followed by

READ.

The number of tracks and the playing time of the CD are shown on the display.

TMCK

TOTAL

nMC

Iris SHU

' Press PLAY/REPLAY g to start play.

You can also press PLAY/REPLAY immediately after inserting the CD; the compartment then closes automatically.

You can also close the CD compartment by pressing its front; playback will then start automatically.

• The number indicator shows how many tracks are on the CD; when a track has been played its number disappears.

■10 '11 ’12

■10

11

12

The track being played is always shown under TRACK and its elapsed playing time is shown under TRACK TIME

■ 1

3

54 3

) 4 ^ 8 7 a 9 10 It 12

- Play will stop after the last track.

• Press POWER ON/STANDBY 7 to switch the player off.

You can interrupt playback by pressing PAUSE 22; PAUSE then lights up. Press PLAY/REPLAY 5to restart; if you

first press PAUSE again and

then

PLAY/REPLAY, the current track starts again from the beginning.

You can also restart play by pressing SCAN

23 (on the remote control),

SHUFFLE 75 or the 1-0 digit keys 5.

If you press PLAY/REPLAY

during play,

the current track starts again from the beginning.

You can stop playback by pressing STOP/CP 7 or OPEN/CLOSE

10.

s:

_<2

5»

c

u

SELECTIIMG ANOTHER TRACK DURING PLAY

(1-0)

• Key in the desired number {numbers consisting of two figures

must be keyed in

within 2 seconds).

-

The music stops and a moment later the selected track

begins to play.

You can also select the number by pressing or

(less than 0.5 seconds).

9

briefly

STARTING WITH A PARTICULAR TRACK

(1-0)

* •

• Press STOP/CP 7.
• Key in the required number (numbers consisting of two

figures must be keyed in

within 2 seconds).

-

Play starts from the selected track.

You can also select the number by pressing or

9

briefly (less than 0.5 seconds) and then pressing PLAY/REPLAY

8.

SEARCHING FOR A PASSAGE DURING PLAY (!◄◄

• Hold 9 down to search backwards to the beginning.
• Hold ►►I 9 down to search forwards to the end.

The searching speed is determined by how long a key is

pressed:

- the first 2 seconds fairly slowly, with sound;
- then at the maximum speed, with no sound.

If you reach the end of the last track and release ►►!, play will

resume a few seconds before the end of the CD.

SCANNING A CD

(SCAN)

Press SCAN

23 (on the remote control)

before or during play.

If the CD compartment was open, it will now close.

SCAN

lights up for 2 seconds and the first 10 seconds of

each track are played in turn. 10 seconds are counted down
each time under REM TRACK TIME.

TRACK

Z3

RCM TRACK TW

n n o

U: U (J

S e 7

8

9

10 II 12

• When the player reaches a track which you wish to hear in

full, press SCAN 23 again or PLAY/REPLAY 8.

Other scan times can be entered in the PRESETS mode. For

this refer to 'PERSONAL PRESETS' on page 11.

This manual is related to the following products: