Philips CD 750/00B - Manual (Page 2)

FITTING A MAINS PLUG (U.K. only)
This apparatus is fitted with an
approved moulded 13 Amp plug.
To change a fuse in this type of
plug proceed as follows:
• Remove fuse cover and fuse.
• Fix new fuse which should be
a BS1362 5A, A.S.T.A. or
BSI approved type.
• Refit the fuse cover.
If the fitted plug is not suitable
for your socket outlets,
it should be cut off and an
appropriate plug fitted in its
place.
If the mains plug contains a fuse, this should have a value of 5A.
If a plug without a fuse is used, the fuse at the distribution board
should not be greater than 5A.
NOTE: The severed plug must be disposed to avoid a possible
shock hazard should it be inserted into a 13A socket elsewhere.
HOW TO CONNECT A PLUG
The wires in the mains lead are coloured in accordance with the
following code: BLUE - 'NEUTRAL' ('N') BROWN - 'LIVE' CL')
As these colours may not correspend with the colour
markings
identifying the terminals in your plug, proceed as follows:
• The BLUE wire must be connected to the terminal which is
marked with the letter 'N' or coloured BLACK,
• The BROWN wire must be connected to the terminal which
is marked with the letter 'L' or coloured RED.
• Do not connect either wires to the earth terminal in the plug
which is marked by the letter 'E' or by the safety earth
symbol or coloured green or green-and-yellow.
Before replacing the plug cover, make certain that the cord
grip is clamped over the sheath of the lead - not simply over
the two wires.