Philips CD 750/00B - Manual (Page 11)

PERSONAL PRESETS
In the PRESETS mode you can store your preferred settings for a number of functions in the player's memory.
All settings will remain stored in the memory, even if you switch it off.
PRESETS ACTIVE lights up if you press a ’wrong' key while setting.
OPENING THE PRESETS MEMORY (PRESETS)
Press PRESETS 13.
PRESETS FADER-SPACE-SCAN-PLAY appears on the display.
You can now set the following functions in any required order:
,c
"o)
c
u
FADE-IN AND FADE-OUT TIME (FADER)____________
• Press FADER 19.
~ FADE lights up with next to it the set fade-in/fade-out time.
PLAY MODE (PLAY/REPLAY)
• Select the required fade-in/fade-out time using or 9;
minimum 2 seconds and maximum 10 seconds.
- The fade-in/fade-out time has now been set.
• Select the next setting or press STOP/CP 7 or PRESETS 13
to go back to STOP mode.
EXTRA PAUSE (AUTO SPACE)________________________
• Press AUTO SPACE 20.
- SPC lights up with next to it the set pause time.
• Select the required pause time using or 9;
minimum 0 seconds and maximum 9 seconds.
- The pause time has now been set.
• Select the next setting or press STOP/CP 7 or PRESETS 13
to go back to STOP mode.
Depending on what play mode you select, after switching on
the player or closing the CD compartment by hand, play will
automatically begin with:
- the whole CD (PLAY);
- the tracks of the CD in a random order (SHUF);
- the FTS programme of the CD (FTS P);
- the FTS programme in a random order (FTS S);
If you select STOP, then you must start play yourself with
PLAY/REPLAY
8, SHUFFLE 75or SCAN 23 (remote control).
• Press PLAY/REPLAY 8.
- The display shows the last selected play mode.
Select the required play mode using or !-<◄ 9;
PLAY, SHUF(fle), FTS P(lay) or FTS S(huffle).
The play mode has now been set.
Select the next setting or press STOP/CP 7 or PRESETS 13
to go back to STOP mode.
SCAN TIME (SCAN)
• Press SCAN 23 (on the remote control).
- SCAN lights up with next to it the set scan time.
• Select the required scan time using or
minimum 10 seconds and maximum 19 seconds.
- The scan time has now been set.
• Select the next setting or press STOP/CP 7 or PRESETS 13
to go back to STOP mode.
11