Philips RD5050/18 - Manual (Page 9)

Playing a CD Skip/Search
Remarks
• If there is a CD in the unit, the CD will automatically start to play when the unit
is switched on.
• If the batteries are exhausted, the CD player will not function normally, e.g.
it will not start. Replace the batteries or use the mains adapter.
• If after pressing PLAY/PAUSE ООН, the CD-player does not function, this
means that the CD player cannot read the CD. Possible causes are:
- You inserted the CD upside down;
- The CD is badly scratched or dirty, see 'Maintenance'.
- The lens ® is steamed up, see 'Maintenance';
- The batteries are exhausted.
M4 SKIP^i
During playback:
- go to the next title
• You can jump to the next title by briefly pressing SKIP wx once.
• If you want to skip more than one track, then briefly press SKIP > m more than
once until the display shows the desired track number.
During playback:
MO - go to the previous title
• If you want to repeat the current title from the beginning, briefly press SKIP
MO once.
• If you want to repeat one of the previous titles, briefly SKIP
mo
more than once
until the display shows the required track number.
In the STOP mode with a CD inserted
• You can select the title by pressing SKIP mo and kx briefly, once or more than
once, until the display shows the desired track number.
HO SEARCH w_____________________________________________
Searching for a passage during playback
• During playback, hold
km
SEARCH t>w pressed down to search for the
required passage.
Note:
This is an "AUDIBLE SEARCH".
The volume will automatically be reduced to a low level during search operation
and will return to its normal level when the search button is released.