Philips RD5050/18 - Manual (Page 10)

Programming
MODE (INTROSCAN/REPEAT/SHUFFLE)
To repeat the current track in the CD continuously, press the MODE button
once (XI): ' CD 1' appears on the display.
To repeat the whole CD continuously, press the MODE button twice (X2): 'CD
ALL' appears on the display.
To start 'Introductory Play' of the CD. press the MODE button three times
(X3): 'INTRO' appears on the display.
To play all the tracks in a random order, press the MODE button four times;
'SHUFFLE' appears on the display.
PROGRAMMING
You can store up to twenty (20) CD tracks into the memory in the desired
sequence in STOP mode or in PLAY mode.
• Ensure that the HOLD function is deactivated, othenwise the CD player
buttons will not operate.
• Connect the headphones to the PHONES socket.
• Press OPEN to open the CD cover.
• Insert the CD, printed side facing up and close the cover.
The CD-player scans the contents list of the disc. The display shows the
number of tracks on the disc.
• Playback will start automatically and you can start programming,
or
• Press STOP/CLEAR D to stop playback or let the playback continue.
• Press MEMORY. MEMO flashes in the display.
• Select the track to be programmed by pressing the buttons км SKIP/
SEARCH Ш.
- The selected track flashes in the display.
- Press MEMORY again to store the track into the memory.
• Repeat this procedure to select other tracks that you wish to programme in
the memory.
• Press PLAY/PAUSE>ra to start the playback of the program.
- 'MEMO' and ► appears on the display.
• Adjust the sound with the VOLUME control and for extra amplification of the
bass set the BASS BOOST switch to the on position.
• To cancel the program, press the STOP/CLEAR □ button 2X (twice).
10