Philips FC 911 - Manual (Page 6)

@) OPERATION
m
3
(Q
55'
3"
PLAYBACK
Playback of one side (deck A or B)
• Open the cassette holder of the selected deck by pressing the corresponding OPEN button.
• Insert a recorded cassette with the open side facing downwards.
• Close the cassette holder.
• Select H with the reverse-mode selector 10.
• If desired, switch on the Dolby NR system
9.
• Select the playback direction with the CHANGE SIDE key. The tape travel direction will be indicated on
the display (FRONT or BACK)
• Now press the PLAY ► key on deck A or B.
The green indicator above the PLAY ► key lights up.
The deck plays one cassette side and the tape stops automatically at the end.
• You can stop playback by pressing STOP ■ on deck A or B.
• In order to continue playback press PLAY>- again.
Playback of both sides (deck A or B)
• if you want to play both sides of the cassette, proceed as described under 'Playback of one side' but
select TD with the reverse-mode selector 10.
The deck plays both cassette sides and the tape stops automatically at the end of the second side.
CONTINUOUS PLAYBACK
Continuous playback with two cassettes
(deck A and B)
• Insert a recorded cassette into both cassette holders as
indicated above.
• Close the cassette holders.
• Selected CD with the reverse-mode selector 10.
• If desired, switch on the Dolby NR system 9.
• Select the playback direction of deck A with the respective
CHANGE SIDE key.
• Press PLAY ► on deck A.
- Deck A plays both cassette sides and then deck B plays
both cassette sides.
- Deck A starts again and both decks keep playing both
cassette sides continuously (to a maximum of three times
for each cassette).
• Press STOP n on the playing deck to stop continuous
playback.
Note
If you wish to start with deck B, first select the playback
direction of deck B with the respective CHANGE SIDE key and
then press the PLAY ► key of deck B.
Continuous playback with one cassette (deck A or B)
• Insert a recorded cassette into one cassette holder as
indicated above.
• Close the cassette holder.
• Select CD with the reverse-mode selector 10.
If desired, switch on the Dolby NR system 9.
• Select the playback direction with the CHANGE SIDE key (of
deck A or B)
• Press PLAY ► (on deck A or B).
• The selected deck keeps playing both cassette sides (up to a
maximum of six times) until you press STOP ■ on the
playing deck.
FAST WINDING/REWINDING OF A TAPE
Use the FORWARD ►► keys for fast winding in the tape
travel direction.
Use the BACKWARD ◄◄ keys for fast winding in the
opposite direction to that in which the tape is travelling.
A flashing (4x per second) green indicator above the PLAY
keys indicates the winding action.
DIGITAL TAPE COUNTER * •
The digital counter is used for deck A and deck B.
COUNTER RESET
• The counter can be reset to 0000 by pressing the
COUNTER RESET key.
• The counter of the selected deck will be reset. The status of
the counter of the other deck will be kept in the memory.
• The counter will also be reset:
- when the cassette holder is closed;
- every time the play direction is reversed (automatically or
manually).
COUNTER SELECT
• You can display the counter of deck A or of deck B with the
COUNTER SELECT key
• The indication DECK A or DECK B will light up on the
display.