Philips AQ6426/20 - Manual (Page 6)

English
SUPPLY
Batteries:
Insert as indicated two alkaline batteries, type R6, UM3 or
AA. Remove the batteries if exhausted or if they are not to be used for
a long time.
Mains adaptor: Connect a mains adaptor to the 3V DC socket.
The adaptor must supply 3V DC minuspole © to the 1.3 mm
centre pin of the 3.4 mm socket.
PLAYING BACK CASSETTES
• Connect headphones to Ci PHONES.
• Press OPEN to open the cassette holder and insert the cassette in it
with the open part facing the buttons.
• Adjust DOLBY NRDQ (noise'reduction) ON or OFF.
• To start playback, press PLAY ◄
• Adjust the sound with
VOLUME
and
DBB
(bass).
• During playback you can reverse the tape direction' using ◄ DlR ►.
• To stop, press
STOP
and the set is switched off.
Fast Winding: Press
FAST WIND
or To stop, press
STOP.
AUTO REVERSE
> The tape direction will be automatically reversed whenever the player
reaches the end of the tape. So the cassette is played continuously
until you press
STOP (or until the batteries are exhausted).
MAINTENANCE * •
• Clean the magnetic head after every 50 hours of operation or, on
average, once a month by playing through a cleaning cassette.
• Do not expose the set and cassettes to rain, moisture, sand, or to
excessive heat from e.g. heating equipment or in motor cars parked in
the sun.
The type number will be found at the bottom of the set and the serial
number in the battery compartment.
This set complies with the radio interference requirements of the
European Community. ________ __________