Philips AZ1007/01 - Manual (Page 5)

CASSEHE RECORDER
PtAYING A CASSETTE
1. Set the source selector to TAPE.
2. Press STOP«OPEN ■ A to open the cassette holder and
insert a recorded cassette,
3. Close the cassette holder.
4. Press PLAY A to start playback.
5. Adjust the sound using the VOLUME and DBB controls.
6. To interrupt playback press PAUSE II. To resume, press the
key again.
7. By pressing or ►►,fast winding of the tape is possible in
both directions.To stop fast winding, press STOP"OPEN BA
8. To stop the tape, press STOP«OPEN B A
— Ihe keys are automatically released at the end of the tape,
except if PAUSE II has been activated.
S. With file source selector in TAPE/ power off position, the set
is switched off when all the cassette keys are released.
General information on cassette recording
Recording is permissible insofar as copyright or other rights of
third parries are not infringed.
This dock IS not suitable for recording on CHROME (lEC II) or
METAL (lEC IV) lype cassettes. For recording you should use
NORMAL type cassettes (lEC I) on which the tabs have not,
been broken.
The recording level is set automatically. Altering the VOLUME
and DBB controls will not affect the recording in progress.
At the very beginning and end of the tape, no recording will
take place during the 7 seconds, when the leader tape passes
the recorder heads.
To protect a tape from accidental erasure hove the tape m
front of you and break out the left tab. Recording on this side
is no longer pnssible. To record over this side again, cover the
labs with a p'ece of adhesive tape.
CASSEHE RECORDER
START CD RECORDING
1.
Set the source selector to CD.
2.
Insert a CD and if desired, programme track numbers.
3.
Press STOP*OPEN B A to open the cassette holder.
4.
Insert a blank tape.
5.
Close the cassette holder.
6.
Press RECORD • to start recording.
— Playing of the CO programme starts automatically from the
beginning of the programme, it is not necessary to start the
CD player separately.
7.
For brief interruptions, press PAUSE
II.
To resume recording,
press PAUSE II again.
£ To stop recording press STOP»OPEN B A
To select and record a particular passage within a track
1.
During playback, press and bold down the SEARCH button kw
or w to find your passage
2.
Press PlAY»WUi^Hl to put the CD player on pause at the
selected passage.
— Recording will begin from this exact point in the track when
you press RECORD •.
[йшишшс том m rapio
1. Set the source selector to RADIO.
2. Tune to the desired radio station (See RADIO RECEPTION).
3. Press STOP*OPEN В A to open the cassette holder and
insert a blank tape,
4.
Close the cassette holder.
5. Press RECORD • to start recording.
Note:
If you are recording on MW (AMj station, adjust the
BEAT CUT switch to eliminate any whistle noises.
ft For brief interruptions, press PAUSE II. To resume recording,
press PAUSE II again.
7 To stop recording, press STOP*OPEN В A