Philips AZ1007/01 - Manual (Page 4)

CD PLAYER
CD DISPLAY INDICATION
- Cd: CD door open/scanning for CD.
- Total track number: in stop mode.
- Current track number: during CD play.
■ Current track number flashes: in Pause mode.
- shuffle / repeat modes: when the respective mode is activated.
- program : When active. P also appears briefly when you store a
track.
- no: no disc/ error in CD operation or with the CD (see
Troubleshooting)
-- e ; error in CD operation.
- f : programme memory full
PLAYING A CD
P
lid
Lu
pmvum
I. Set the source selector to CD
Z To open the CD door, lift the CD door edge marked LIFT TO OPEN.
3. Insert a CD with the printed side facing up and press the CD door
gently to close.
The CD player scans the contents of the CD and the total number
of tracks IS displayed.
4. Press PLAY*PAUSE Wl to start playback,
5i Adjust the sound using the VOLUME and DBB controls,
6. To interrupt playback press PLAY»PAUSE Ml To resume, press
PIAY»PAUSEMI again
The current track number flashes in the display
7. To stop CD play, press STOP ■.
a To switch off the set, adjust the source selector to TAP|/ power off
position [with the cassette keys released)
/Vote: CO playback will also stop when:
-the CD door Is opened;
- the source selector is in the TAPE/RADIO positions;
- the CD has reached the end.
SELECTING A DITFEHENTTRACK
During playback, you can use the SEARCH keys to select a particular
track,
1. Press SEARCH ►w once for the next track, or press repeatedly until
the desired track number appears in the display.
Press SEARCH once to return to the beginning of a current
track. Press SEARCH t** more than once for a previous track.
Z If you have selected a track number in the stop or pause position,
you will need to press PLAY'PAUSEMltostart playback.
Finding a passage within a track
1. Press and hold down SEARCH fm or
— The CD is played at high speed and low volume.
Z When you recognize the passage you want, release the SEARCH
key.
9
CD PLAYER
Different play madea: SHUFFLEAIEPEAT
The CD MODE button allows you to select 4 different play modes
which can also be combined with a CD program. The modes can
be selected or changed during playback and will flash for two
seconds before playing your selected mode.
1. During playback, select your play mode by pressing
CD MODE once or more until the desired play mode appears
in the display.
SHUFFLE - All tracks or programme are played in random
order.
REPEAT ALL SHUFFLE - Repeats the entire CD or programme
in random order.
REPEAT - Plays the current track continuously.
REPEAT ALL - repeats the entire CD or programme
You can use SEARCH r« or to skip tracks during CO
MODE playback.
Z To return to normal playback press CD MODE until the various
SHUFFLE/ REPEAT modes are no longer shown in the display.
You can also press STOP ■ to quit the play mode.
■iS
“w
REPEAT
ALL "" 1C
lU PROGRAM
Pff@GRWMHHNGT№ff NUMiFl^
You may store up to 20 tracks in the desired sequence. If you
like, store any track more than once.
1. In the STOP position, press SEARCH m or for your
desired track,
Z As soon as your chosen track number is displayed, press
CD MODE once to store the track
The display will show 'P' briefly and ' program ', followed by
your selected track number.
3. Select and store all desired tracks in this way.
To review your set programme
• In the stop position, press and hold down CD MODE for more
than two seconds.
The display will show in sequence all your stored track
numbers.
• Start playback of your programme by pressing
PLAY*PAUSE HI
Erasing a programme
You can erase the contents of the memory by:
- lifting the CD door open;
- moving the source selector position,
- pressing STOP ■ twice during playback / in stop position,
-* The display will show 'no' briefly and program , which
disappear when the programme is cancelled.
O
PfiOCiRAM :