Philips CDI740/05 - Manual (Page 9)

POINTING DEVICE
CD-i CONTROLLER
For some applications, other types of pointing devices,
keyboards or controllers may be required. These CD-i
Controllers can be connected to Input 1 (13) and 2 (12) on the
front of the player. Optional devices are: Roller Controller,
Trackerball, Mouse, Gamepad (refer to the accessories page on
the back of this manual). For further information on this subject,
please contact your national Philips organization.
• Press the ON/OFF button (16) lo switch the player off.
• Plug the connector of the CD-i controller into the input
(12,13). Insert the connector with the arrow facing upwards.
• .Switch the player on.
• Move the cursor in the direction you want.
• Click on one of the action buttons.
- The function selected by this "point-and-click" technique is
highlighted to confirm the selection.
NOTE
- To "point-and-click" on any screen shown in this manual, any
of the action buttons of the pointing device can be used.
- The shape of the cursor can be different according to the
program you are playing, but it is always controlled in the
same way.
- Pointing devices are sensitive precision instruments. Handle
them with care, keeping in mind the following precautions:
• Avoid dropping or knocking.
• Do not use them in locations subject to extreme
temperatures, humidity, dust or vibration.
• Never hold the pointing device by the cable.
• Never pull the cable to disconnect the pointing device from
the player.
• When only one pointing device is used, preferably connect
it to input 1 to avoid problems with the infra red remote
control.
CAUTION
NEVER MAKE OR CHANGE CONNECTIONS WITH THE
POWER SWITCHED ON.