Philips CDI740/05 - Manual (Page 13)

PLAYING DISCS
PLAYING AN AUDIO CD
After the disc is loaded, the
CD-Audio screen appears on the
I
TV.
U 2 3 4 i f . 7 j 8 9 ¡ W
hi 12 13 14 15 16 17 i T b 19 ;2n
................. .......................... ................: 6S.27 1. PLAY TRACK BAR;
Hhow.s all the tracknumbers fup
to 3to select any track. For discs with
more than 30 tracks, use the right > and left < scroll arrows to
move through the track list.
2. PROGRAM: Allows you to program a list of special tracks
called a Favourite Track Selection. When you select
PROGRAM, the FTS track bar and the FTS icon will appear.
3. FTS; Allows you to play Favourite Track Selections. This icon
I >nly appears if a Favourite Track Selection has been created
for the disc that is loaded in the player.
4.SCAN; /Vllows you to listen to the beginning of every track
listed in the play track bar. You can set the scan time to 5, 10
or 20 seconds in the 'Options' screen, (see p.lO).
5. SHUFFLE; Allows you to play the tracks in the play track bar
in a random order.
6. REPEAT; Mlows you to repeat either a track or the entire disc.
You can change the repeat mode in the 'Options' screen, (see
p.lO).
7. TRACK/TIME window:
- In STOP mode, this show's the total number of tracks and the
total playing time. When you click at this window f7J, the
track time of the selected track is displayed.
- In PL\Y and PAUSE modes, the window shows the track number
and either the elapsed or the remaining track playing time. To
change betw’een elapsed and remaining time, 'point-and-click' at
the time shown in the window.
8. Ml the disc play control functions are shown on the screen,
and can be selected as desired by 'point-and-click' with your
remote control. The operation of the functions is briefly
explained in the following table.
NOTE
- If aut( I Shuffle, auto Play or auto FTS has been selected on the
‘CD Audio’ screen, this function will be activated
automatically.
~ If an FTS has been created for the disc you have loaded, then
CD-FTS flashes alternately on the local display.
IB. Using the audio screen
OPERATION SELECT
Start play
Select a track
Pause
PLAY^
play starts at the beginning of track 1, or any
other preselected track number. If a track is
already playing, it is re-started.
TRACK number
if the disc contains more than 30 tracks, use the
left < and right > scroll arrows to move through
the track numbers as required.
PAUSE II
interrupts play.
Exit patise PAUSE II or PLAY ►
play restarts at exactly the same point as
pause was selected.
Forward search FORWARD ►►
searches forward through the disc.
Reverse search REVERSE
searches backwards through the disc.
Stop play STOP ■
stops playing. If play is re-started, it begins at
the first track.
Scan the disc SCAN
plays the beginning of each track listed in the
play track bar.
Exit scan
Shuffle play
Exit shuffle
Repeat
Play FTS
Exit FTS
Program FTS
Store FTS
SCAN
normal play starts from this point.
SHUFFLE
shuffle sequence appears in track bar.
SHUFFLE
normal play starts from this point.
REPEAT
repeats the entire disc (FTS or program), or the
track being played, as selected on the
"Options" screen.
FTS
only available when an FTS program has
already been created for the disc in the player.
FTS
normal play starts from this point.
PROGRAM
• Point to tracks as required on the play track
bar, and in each case click on an action button
to enter the track in the FTS track bar.
• To cancel an unwanted track, point to it in
the FTS track bar and click on an action
button.
• To cancel the entire FTS program, point to
the first track in the FTS track bar and click on
an action button repeatedly until all the tracks
disappear.
SAVE FTS
the keyboard screen replaces the CD-Audio
screen. See 'CREATING FTS TITLES'
(see p.l4).
13