Casio IT-2000D User Manual

Page 127

127

Termination Codes and Messages

Termination code

Message

Description

NORMAL END

Normal termination

ABNORMAL END

SYSDRVP or HWWMANP is not installed.
EMS memory driver was not enabled.
KEYPAD.DAT not found.
Parameter error

About the Key Input

If this simulator is resident in memory, input through the keypad is permitted by clicking in the

region that corresponds to each key, in addition to key input via the PC keyboard. (This is possible

irrespective of whether a simulated keypad is being displayed by the G/ option.)

About Coordinate Input

If the application is designed for input of coordinates through the KEY_Read function of the keypad

library, this simulator will implement the same process using the mouse pointer. In this case, if the

left mouse button is clicked DOWN/RUN/UP operations will be simulated. Right mouse button

clicks will be ignored.

Monitoring Keypad Display ON/OFF Status

If the F9 key is pressed, this simulator will show the keypad display ON/OFF status along with other

system library information.

Fig. 7.9