Dichiarazione di conformità, Mains plug, How to connect a plug – Philips AZ 8070 User Manual
Page 2: Norge, Italia, Copyright in the u.k
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Norge
Typeskiltfinnes p3 apparatens underside.
Observer.
Nettbryteren er sekundert innkoplet. Den
innebygde netdelen er derfor ikke frakoplet nettet
s§ lenge apparatet ertilsluttet nettkontakten.
For S redusere faren for brann eller elektrisk slot,
skal apparatet ikke utsettes for regn elier fuktighet.
Italia
DICHIARAZIONE DI CONFORMITÀ'
Si dichiara che l'apparecchio Lettore CD/Radio-
registratore mod. AZ 8070 Phiiips risponde alle
prescrizioni dell'alt. 2 comma 1 del 0. M. 28 Agosto
1995 n.548.
Fatto a Eindhoven, il 18/09/1996
Philips Sounds Vision
Philips, Glaslaan 2. SFF10
5616 JB Eindhoven, The Netherlands
Important notes for users in the U.K.
Mains plug
This apparatus is fitted with an approved moulded 13 Amp
plug. To change a fuse in this type of plug proceed as
follows:
1 Remove fuse cover and fuse.
2 Fix new fuse which should be
a BS1362 5 Amp, AS.TA or BSI approved type.
3 Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it
should be cut off and an appropriate plug fitted in its place.
If the mains plug contains a fuse, this should have a value of
5 Amp. If a plug without a fuse is used, the fuse at the
distribution board should not be greater than 5 Amp.
Note: The severed plug must be disposed of to a void a
possible shock hazard should it be inserted into a 13 Amp
socket elsewhere.
How to connect a plug
The wires in the mains lead are coloured with the following
code' blue = neutral (N), brown = live it). As these colours
may not correspond with the colour markings identifying the
terminals in your plug, proceed as follows.
• Connect the blue wire to the terminal marked N or col
oured black.
• Connect the brown wire to the terminal marked L or col
oured red
• Do not connect either wire to the earth terminal in the
plug, marked E (or k) or coloured green (or green and
yellow).
Before replacing the plug cover, make certain that the cord
grip is clamped over the sheath of the lead - not simply over
the two wires.
Copyright in the U.K.
Recording and playback of material may require consent
See Copyright Act 1956 and The Performer's Protection Acts
1958 to 1972.