Philips AZ 8070 - Manual (Page 11)

CASSETTE RECORDER
CD synchro start - recording from the CD player
.¡2
"5
c
LU
1 Set the POWER ON selector to CD.
2 Insert a CD and if desired, program track numbers.
3 Press STOP-OPEN M to open the cassette compartment.
4 Insert a blank cassette with the open side downwards.
5 Press RECORD • to start recording.
-►Playing of the CD or program starts automatically.
It is not necessary to start the CD player separately.
6 For brief interruptions, press PAUSE II.
To resume recording, press the key once more.
7 To stop recording, press STOP-OPEN ■.
Note: The recording can be started from different positions:
- if the CD player is in the PAUSE position, recording will start
from this very position (use SEARCH orW;
- if the CD player is in the STOP position, recording will start from
the beginning of the CD or program.
Recording from the radio or with the microphone
1 Set the POWER ON selector to TAPE or RADIO.
2 Prepare the sound source for recording:
RADIO: Tune to a radio station.
TAPE (microphone): Connect a microphone with a 3.5mm plug
to the MIC socket. Set the VOLUME control to zero (monitoring
during microphone recording is not possible).
3 Press STOP-OPEN ■ to open the cassette compartment.
4 Insert a blank cassette with the open side downwards.
5 Press RECORD • to start recording.
6 For brief interruptions, press PAUSE II.
To resume recording, press the key once more.
7 To stop recording, press STOP-OPEN ■.
Note: When recording from the radio ora CD, you can connect a
microphone and mix the sounds. Otherwise, be sure there is no
microphone connected that could disturb your recording.
11