Cassette recorder, Playing a cassette, General information on recording – Philips AZ 8070 User Manual

Page 10: Protecting tapes from accidental erasure

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CASSETTE RECORDER

[Playing a cassette

1 Set the POWER ON selector to TAPE.

2 Press STOP-OPEN ■ to open the cassette compartment.

3 Insert a recorded cassette with the open side downwards.

4 Press PLAY ► to start playback.

5 By pressing

►► fast winding of the tape is possible in both

directions.

6 To stop the tape, press STOP-OPEN ■.

Note: The keys are automatically released at the end of the tape.

General information on recording

Recording is permissible insofar as copyright or other rights

of third parties are not infringed.

For recording on this set you should use a cassette of the type

"NORMAL" (lEC type I). This deck is not suited for recording on

cassettes of the type "CHROME" (lEC n) or "METAL" (lEC IV).

The recording level is set automatically. The controls VOLUME

and DBB or INCREDIBLE SURROUND do not affect the recording.

At the very beginning and end of the tape, no recording will take

place during the 7 seconds when the leader tape passes the

recorder heads.

Protecting tapes from accidental erasure

Keep the cassette side to be safeguarded in front of you and

break out the left tab. Now, recording on this side is no longer

possible.

To render this safeguard ineffective, cover the aperture with a

piece of adhesive tape.