Philips AK 701 - Manual (Page 3)

next track or the previous track respectively are
played.
• If the INTROSCAN function is not cancelled by
pressing the PLAY/PAUSE button ® or the STOP
button the CD player automatically reverts to the
STOP position at the end of the last CD.
Shuffle play
• Press SHUFFLE @ before or during play. The
SHUFFLE indication lights up and a shuffle logo
appears in the display.
- All tracks will now be played in a random order.
During play you can use SEARCH NEXT® to select
a following random track, or PREV SEARCH ® to
play the same track again.
• Press SHUFFLE again if you wish to return to
normal play.
Interrupting play
• Press PLAY/PAUSE ®.
- PAUSE appears in the display.
• Press PLAY/PAUSE again to end pause.
- Play will be resumed where it was stopped.
Stopping play
• Press STOP ® if you wish to stop. The disc and
track number which can be played will now appear
in the display.
• Press OPEN/CLOSE ® to remove the CDs.
PROGRAMMING
By programming the player, you can play up to
50 tracks in any desired order. If you exceed the
maximum of 50 tracks, F will appear in the display.
• Press PROGRAM ®.
- PROGRAM appears blinking for 5 seconds in the
display together with the disc number. A- further
selection must be done within the 5 seconds
banking period, otherwise you have to press
PROGRAM ® again.
• Select the disc number - if necessary - from which
you wish to store tracks using the DISC SELECT
buttons ®.
• Press SEARCH NEXT ® (or PREV SEARCH ®)
until the required track number appears in the
display.
• Store the required number using PROGRAM ©.
- Each time you store a track, a P will appear and the
display will blink another 5 seconds.
• Repeat this procedure for the other tracks to be
programmed.
• If you program track numbers which do not exist,
these will be ignored during play and erased from the
memory.
•
During normal playback (PLAY. SHUFFLE or
INTROSCAN), you can program the number of the
current track into the rnemoty by pressing the*
PROGRAM button ® twice.
Reviewing the programme
• Press REVIEW ©.
- All track numbers and CD numbers appear in the
programmed order in the- display.
Erasing the programme.
• If you wish to erase the programme, press CLEAR
PROGRAM ®.
• The programme of a particular CD will be erased
if you press CLEAR PROGRAM ® and the relevant
DISC SELECT button @ immediately thereafter.
Playing the programme
Beginning from the STOP mode, press PLAY/
PAUSE ®
- Play begins with the first item in the programme.
GENERAL INFpRMATION
Maintenance
The disc
(f you handle the discs carefully, cleaning will not be
necessary. Dust or dirt can be removed using a soft,
lint-free cloth. Always wipe the cloth in a straight line
from the centre to the edge of the disc (Rg. 4).
Never use cleaning agents such as are used for
conventional grammophone records.
Never write on the disc label or on a sticker which has
been placed on the label. This can cause irreparable
damage to the music tracks.
The piayer
Never oil or lubricate the CD mechanism. Keep the
CD compartment free of dust. The CD tray should
therefore never be left open unnecessarily.
This unit complies with the radio interference require­
ments as laid down in EC regulations.