Interlogix TruPortal Quick Start - Manual (Page 9)

2.2 Change IP address settings (DHCP to Fixed)
• The “Discovery and Installation Wizard” will identify the System Controller
connected to the local network or directly to the PC. IP door controllers and
other add-ons are not discoverable with this tool. See step 2.3
• (Recommended) Change the default password for the Administrator account
• Synchronize the date and time on the System Controller with the PC and
fi nalize IP Networking settings. (Note: static IP is recommended in most cases)
• If the ”Direct-connect method” was used: After network settings have
been applied, remove the connection to Ethernet Port 2. Your panel is now
accessible by any PC on your network via Ethernet Port 1
• Reboot the System Controller after IP settings have changed
To avoid IP address confl icts and other issues, consult with the site
network administrator to decide how network settings should be
confi gured.