Interlogix TruPortal Quick Start - Manual (Page 10)

STEP 2 Confi gure Networking
2.3 Confi gure Networking on IP-based
1-Door Add-ons
Before you start:
• All IPSDCs have the same default IP address of 192.168.6.6. During initial setup,
only connect one IPSDC at a time to the network to avoid addressing confl icts
• Make sure your PC/laptop will be able to connect to 192.168.6.6
• Refer to the TruPortal IPSDC Quick Reference for additional details
If you are using PoE (Power over Ethernet):
• Connect network cable between IPSDC connector J10 and your
PoE-enabled network switch
• Connect your PC/Laptop to the same local network
If you are not using PoE:
• Connect IPSDC and PC/laptop to the same local network (e.g. same switch)
• Alternatively, connect network cable directly between IPSDC connector
J10 and your PC/laptop (crossover cable not required)
• Provide 24VDC to the IPSDC via connector J8