Interlogix UVD-6120VE-2 User Manual - Manual (Page 14)

12 UltraView UVD-6120VE-2 Digital WDR Dome Camera User Manual
Table 7: Privacy menu
Menu item Description
Mask 1 Setup
Mask 2 Setup
Mask 3 Setup
Mask 4 Setup
When enabled, you can set up four privacy mask areas on screen.
For each mask set the following parameters:
• Mask: On/Off
• Color: Blue / Pink / Yellow / Cyan / Coffee / White / Red / Green
• H Start: Start of horizontal position 0 to 500
• H End: End of horizontal position 0 to 500
• V Start: Start of vertical position 0 to 280
• V End: End of vertical position 0 to 280
• Return: Press
Enter to return to the previous menu
• Exit & Save: Exits the menu and returns to live mode. Saves changes made
Return Press Enter to return to the previous menu.
Exit & Save Exits the menu and returns to live mode. Saves changes made.
Picture adjustment menu
Set the camera image characteristics such as brightness, contrast, sharpness,
hue, and saturation (called “Gain” here) of the picture.
Select the Pict Adjust option from the Main menu to enter the Picture menu.
Figure 11: Picture adjustment menu
Reset camera
Use this function to restore the camera parameters to the factory defaults values.
Select the
Reset option from the Main menu to restore factory default values.
Specifications
Model UVD-6120VE-2-P / UVD-6120VE-2-N
Lens type Varifocal: 2.8 to 10 mm
Power supply 24 VAC / 12 VDC
Current 250 mA.
Max: 400 mA (heater on)