Interlogix NS3702-24P-4S Quick Start - Manual (Page 9)

- 9 -
 Configuration of IP Address
3. On “NS3702-24P-4S # ” prompt, enter the following command and press as shown in Figure 5-2.
”NS3702-24P-4S:/IP> setup 192.168.0.101 255.255.255.0
The previous command would apply the following settings for the Managed Switch.
IP Address: 192.168.0.101
Subnet Mask: 255.255.255.0
Figure 5-2:
Setting IP Address
4. Repeat Step 1 to check if the IP address is changed.
5. If the IP is successfully configured, the Managed Switch will apply the new IP address setting immediately. You can access the
Web interface of Managed Switch through the new IP address.
If you are not familiar with console command or the related parameter, enter “help”
anytime in console to get the help description.