Interlogix NS3702-24P-4S Quick Start - Manual (Page 7)

- 7 -
4. Logon to the Console
Once the terminal has been connected to the device, power on the Managed Switch and the terminal will
display “running testing procedures”.
Then, the following message asks for the login username and password. The factory default username and
password are admin as the following and the login screen in Figure 4-1 appears.
Username: admin
Password: admin
Figure 4-1:
Managed Switch Console Login Screen
1. For security reason, please change and memorize the
new password after this first setup.
2. Only accept command in lowercase letter under console
interface.