Creative Labs Creative PC-CAM 930 Slim 02VF016000000 - Manual (Page 35)

5-1 Installing Creative PC-CAM 930 Slim
Installing Creative PC-CAM 930 Slim
This chapter tells you how to quickly install Creative PC-CAM 930 Slim, as both a
PC-CAM and Mass Storage device, and the software that comes with it.
Installing your
camera 1. Do not connect your camera to your computer before installing the drivers.
If you accidentally begin installation with your camera connected, the Add New
Hardware Wizard or Found New Hardware Wizard dialog box may appear.
If you are using Windows 98 or Windows 98 SE, click the Cancel button. For all
other operating systems, follow the instructions on the screen and disconnect
your camera from your computer.
2. Insert the installation CD into your CD-ROM or CD-ROM/DVD-ROM drive. Your
CD should start automatically. If it does not, follow the steps below:
i. Start Windows Explorer.
ii. On the left pane, click the My Computer icon.
iii. Right-click the CD-ROM/DVD-ROM drive icon, and then click AutoPlay.
3. Click the options for installing drivers and applications.
4. Follow the instructions on the screen to complete the installation. You may be
asked, after an application is installed, if you want to restart your computer. Do
not restart your computer until all the drivers and applications are installed.
PC-CAM 930 Slim.book Page 1 Thursday, May 19, 2005 5:27 PM