Interlogix MCR200-1T-1TW - Manual (Page 11)

8 IFS MCR200-1T-1TW User Guide
LED indicators for MCR200-1T-1TW
The rich diagnostic LEDs on the front panel can provide the operating
status of individual port and whole system.
■ System
LED Color
Function
Light Power
ON
PWR Green
Off Power OFF
■ VDSL
LED Color
Function
Light
Indicate that the VDSL link is
established.
Fast Blink
Indicate that the VDSL link is at training
status (about 10 seconds).
LNK/ACT
Green
Slow Blink
Indicate that the VDSL link is at idle
status.
CO
Green Light
Indicate the VDSL Bridge is running at
CO mode.
CPE
Green Light
Indicate the VDSL Bridge is running at
CPE mode.
■ 10/100Base-TX Port
LED Color
Function
Light Indicate that the port is Link Up.
Blink
Indicate that the Converter is actively
sending or receiving data over that port.
LNK/ACT
Green
Off Indicate that the port is Link Down.
Light
Indicate that the port is operating at
100Mbps.
100
Green
Off
Indicate that the port is Link Down or
10Mbps.
2CO
Green Light
Indicate the VDSL Bridge is running at CO
mode.
CPE
Green Light
Indicate the VDSL Bridge is running at CPE
mode.