Interlogix MC350-4T-2S - Manual (Page 5)

1.3 Product Features
Physical Port
„ 4-Port 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function
„ 2 SFP interfaces, 100/1000Base-X dual mode (DIP switch control)
Layer 2 Features
„ IEEE 802.3 / 802.3u / 802.3ab / 802.3z Ethernet Standard Compliant
„ Supports Auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
„ High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize
the network bandwidth
„ Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control
(Full-Duplex)
„ 9K Jumbo Frame Size support
„ Backplane (Switching Fabric): 12Gbps
„ Integrated address look-up engine, support 1K absolute MAC addresses
„ Automatic address learning and address aging
„ CSMA/CD Protocol
Industrial Case / Installation
„ Slim IP30 metal case / protection
„ DIN Rail and Wall Mount Design
„ Redundant Power Design
- 12 to 48V DC, redundant power with polarity reverse protect function
- AC 24V power adapter acceptable
„ Supports EFT protection for 6000 VDC for power line
„ Supports 6000 VDC Ethernet ESD protection
„ -40 to 75 degrees C operating temperature
Fiber Port Redundancy
„ Link status auto-detect and redundant on Dual ports with the same connector type
„ Only when Primary-Port is active, the Backup-Port is blocked.
„ When Primary-Port link fails, the traffic will swap to Backup-Port automatically.
„ Once the Primary-Port status is back to link up, the traffic swaps from Backup-Port to Primary-Port.