Intellijel Korgasmatron II - Manual (Page 31)

CV
CUTOFF/BANDWIDTH
Dual BAND-REJECT filter patch
29
Monitoring band-pass filter at OUT B in SERIAL
configuration.
dual band-reject CUTOFF shift :
Manually set A & B cutoff, with
A band-reject cutoff
always ≠ B band-reject cutoff . Keep same relative knobs
position for cutoff shift.
OR/AND
Input same CV signal in A & B FM 1 with same attenuation
levels.
OR/AND
Use FM 2 normalled input and set FM 2 B as FM 2 A.
dual band-reject BANDWIDTH set :
Manually set A & B cutoff, with
A band-reject cutoff
always ≠ B band-reject cutoff . Keep different relative
knobs positions for banwidth set.
OR/AND
Input different CV signals in A & B FM 1 with different
attenuation level.
OR/AND
Use FM 2 normalled input and set FM 2 B as inverted of
FM 2 A.
See dual band-reject filter chart for details on OUT B
filter curves.
signal to be
filtered
CUTOFF/BANDWIDTH
set with
A band-reject always
≠ B band-reject
CV
CUTOFF/BANDWIDTH
dual band-reject out
A B
out
freq.