Intellijel Korgasmatron II - Manual (Page 19)

CV
CUTOFF/BANDWIDTH
2-pole BAND-PASS filter patch
17
band-pass filter out
signal to be
filtered
CUTOFF/BANDWIDTH
set with
A low-pass
always > B high-pass
CV
CUTOFF/BANDWIDTH
Monitoring band-pass filter at OUT B in SERIAL
configuration.
band-pass CUTOFF shift :
Manually set A & B cutoff, with
A low-pass cutoff always
> B high-pass cutoff . Keep same relative knobs position
for cutoff shift.
OR/AND
Input same CV signal in A & B FM 1 with same attenuation
levels.
OR/AND
Use FM 2 normalled input and set FM 2 B as FM 2 A.
band-pass BANDWIDTH set :
Manually set A & B cutoff, with
A low-pass cutoff always
> B high-pass cutoff . Keep different relative knobs
positions for bandwidth set.
OR/AND
Input different CV signals in A & B FM 1 with different
attenuation level.
OR/AND
Use FM 2 normalled input and set FM 2 B as inverted of
FM 2 A.
See band-pass filter chart for details on OUT B filter
curves.
A B
out
freq.