beautypg.com

C sd card installation – IC Realtime 2Megapixel HD Network Fish-Eye Camera (ICIPD2360) User Manual

Page 11

background image

I C R E A L T I M E S E C U R I T Y S O L U T I O N S

8

2.c SD Card Installation

Step 1: Disconnect power source from the IP Camera

SD cards shall not be installed or removed while the camera is powered and operational. Doing so can

potentially result in damage to the camera, and any data stored on the SD card.

Step 2: Remove the cameras dome cover

Using the included hex wrench from the accessories kit, unfasten the 3 hex screws on the dome camera

enclosure and then remove it..

Step 3: Insert SD card

Look on the base plate of the camera to see the section labeled “SD Card”. Insert your micro SD card (Pin

side down) until it clicks securely into place. At this point you can restore power to the camera, and attache the
dome cover again.