IC Realtime PTZ-2801WDR: High Speed PTZ Dome Camera with 28X Zoom User Manual
Page 28
21
SCAN NO : 001
SET LEFT LIMIT
SET RIGHT LIMIT
SCAN SPEED :160
RUN
STOP
BACK
EXIT
Move the cursor to PAN button and then click confirm button to go to setup interface.
z
PAN SPEED: Set dome rotation speed. Please use the left/right button on the keyboard or in the speed
dome terminal menu to set.
z
RUN: Move the cursor to call item and then click confirm button. The dome begins 360 degrees
continuous rotation.
z
STOP: Highlight stop item and then click confirm button. The dome stops rotation.
z
BACK: Go back to previous menu.
z
EXIT: Log out system menu.
4.4.4.3 Scan
Move the cursor to SCAN button and then click confirm button.
z
SCAN
NO
:Here is to set auto scan number. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
z
SET LEFT LIMIT
:Here is to set camera left address. Click confirm button to save current setup.
z
SET
RIGHT
LIMIT
:Here is to set camera right address. Click confirm button to save current setup.
z
SCAN SPEED: Please use the left/right button on the keyboard or in the speed dome terminal menu to
set.
z
RUN: Please input auto scan number first, and then please move the cursor to RUN and click confirm
button to activate auto scan function.
z
STOP: Here is to terminate auto scan function.
z
BACK: Go back to previous menu.
z
EXIT: Log out system menu.
4.4.4.4 Cruise (Touring)
Move the cursor to highlight CRUISE item and then click confirm button to go to set interface.
z
CRUISE
NO
:Here is to ser tour number. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
CRUISE NO: : 001
CRUISE SETTING
DELETE CRUISE
RUN
STOP
BACK
EXIT