IC Realtime 1/2/4 Channel H.264 Network Video Server - Manual (Page 50)

44
Please refer to the following sheet for detailed information.
Parameter Function
Channel
Here is for you to select a monitor channel.
Channel Name Here is to display current channel name. You can modify it.
Compression H.264
Audio/Video For the main stream, recorded file only contains video by default. You
need to draw a circle here to enable audio function.
For extra stream, you need to draw a circle to select the video first and
then select the audio if necessary.
Resolution
For this model, main stream supports D1 (PAL: 25f/s. NTSC:
30f/s.)/HD1/2CIF/CIF/QCIF. The extra stream supports CIF/QCIF.
Please note the resolution may vary due to different channels.
Frame Rate PAL：1～25f/s；NTSC：1～30f/s
Bit Rate Type
There are two options: VBR and CBR.
Please note, you can set video quality in VBR mode only.
Quality
The value ranges from 1 to 6. The level 6 is the best video quality.
Bit Rate  In CBR, the bit rate here is the max value. In dynamic video, system
needs to low frame rate or video quality to guarantee the value.
 The value is null in VBR mode.
 Please refer to recommend bit rate for the detailed information.
Recommended
Bit Recommended bit rate value according to the resolution and frame
rate you have set.
Color Setting Here you can set video brightness, contrast ness, hue, saturation and
gain.
The value ranges from 0 to 100.Default value is 50.
Please note, some series devices do not support OSD transparent
setup function.
Cover area
(privacy mask)  Here you can privacy mask the specified video in the monitor video.
See Figure 5-26.
 One channel max supports 4 privacy mask zones.
 The privacy mask includes two options: Never/monitor. Never: It
means do not enable privacy mask function. Monitor: the privacy
mask zone can not be viewed in monitor mode. See Figure 5-25.
Time Title  You can enable this function so that system overlays time
information in video window.
 OSD transparent value ranges from 0 to 255. 0 means complete
transparent.
 You can use the mouse to drag the time tile position. See Figure
5-27.
Channel Title  You can enable this function so that system overlays channel
information in video window.
 OSD transparent value ranges from 0 to 255. 0 means complete
transparent.
 You can use the mouse to drag the channel tile position.