beautypg.com

Seat heaters – HONDA 2000 Prelude - Owner's Manual User Manual

Page 86

background image

Seat Heaters

On Canadian models

Both front seats are equipped with

seat heaters. The ignition switch

must be ON (II) to use them. Push
the front of the switch, HI, to rapidly
heat up the seat. After the seat
reaches a comfortable temperature,

select LO by pushing the back of the
switch. This will keep the seat warm.

The HI or LO indicator lights and

remains lit until you turn it off by
pushing the opposite side of the

switch lightly. The indicator will turn
off.

In HI, the heater turns off when the

seat gets warm, and turns back on
after the seat's temperature drops. It
continues to cycle as long as you

leave it set on HI. The HI indicator
remains lit as a reminder that you
have the heater on.

In LO, the heater runs continuously.
It does not cycle with temperature
changes.

Follow these precautions whenever

you use the seat heaters:

Use the HI setting only to heat the
seats quickly. Select the LO

setting when the seats feel warm.

The HI setting draws large

amounts of current from the

battery.

Do not use the seat heaters, even
on the LO setting, if the engine is

left idling for an extended period.

They can weaken the battery,

causing hard starting.

Instruments and Controls

SEAT HEATER

Main Menu

Table of Contents