beautypg.com

Spark plugs – HONDA 2000 Prelude - Owner's Manual User Manual

Page 200

background image

Spark Plugs

3. Remove the spark plug cap by

pulling it straight out.

4. Remove the spark plug with

a five-eighths inch (16 mm) spark

plug socket.

5. Put the new spark plug into the

socket; then screw it into the hole.

Screw it in by hand so you do not
crossthread it.

6. Torque the spark plug. (If you do

not have a torque wrench, tighten

the spark plug two-thirds of a turn

after it contacts the cylinder head.)

Tightening torque:

13 lbf.ft (18N.m ,1.8kgf.m)

CONTINUED

Maintenance

SPARK PLUG

CAP

Main Menu

Table of Contents