beautypg.com

Protecting children – HONDA 2000 Prelude - Owner's Manual User Manual

Page 33

background image

Protecting Children

Rear-Facing Child Seat Installation

The lap/shoulder belts in the back

seats have a locking mechanism that

must be activated to secure a child

seat.

The following pages provide

instructions and tips on how to

secure a rear-facing child seat with

this type of seat belt.

1. With the child seat in the desired

back seating position, route the
belt through the child seat
according to the seat maker's
instructions, then insert the latch

plate into the buckle.

2. To activate the lockable retractor,

slowly pull the shoulder part of the

belt all the way out until it stops,
then let the belt feed back into the
retractor (you might hear a
clicking noise as the belt retracts).

3. After the belt has retracted, tug on

it. If the belt is locked, you will not
be able to pull it out. If you can pull
the belt out, it is not locked and

you will need to repeat these steps.

Driver and Passenger Safety

Main Menu

Table of Contents