beautypg.com

Lights – HONDA 2000 Prelude - Owner's Manual User Manual

Page 224

background image

Lights

Replacing a High-mount Brake

Light Bulb

(Except Type SH model)

1. Remove the high-mount brake

light assembly by pushing it

slightly toward the rear windshield

and sliding it out of the rear shelf.

2. Remove the socket from the light

assembly by turning it one-quarter

turn counterclockwise.

3. Pull the bulb straight out of its

socket.

Push the new bulb straight into

the socket until it bottoms.

4. Reinstall the socket. Turn it

clockwise until it locks.

5. Test the lights to make sure the

new bulb is working.

6. Reinstall the high-mount brake

light assembly on the rear shelf.
Make sure the tabs on the high-
mount brake light assembly fit
into the slots.

Maintenance

HIGH-MOUNT BRAKE

LIGHT ASSEMBLY

Main Menu

Table of Contents