Clarity 440 - Manual (Page 27)

Troubleshooting
E
N
G
L
I
S
H
27
• Make sure the AC Adapter is not
plugged into a wall outlet with other
appliances. Disconnect for 5-10
seconds then reconnect. Place the
handset back on the base and
reinsert the AC Adapter.
• Make sure the handset battery is
fully charged.
• Make sure the handset battery is
fully charged.
• Try relocating the base unit to
another location.
• Make sure the AC Adapter is not
plugged into the wall outlet with
other appliances.
Phone Will Not Hold Charge:
• Make sure the charging contacts on
the handset and base are free of dust
and dirt. Clean the contacts with a
soft cloth.
• Make sure CHARGE LED on the base
is lit when handset is in the cradle.
• If necessary, replace the handset
battery. (See Handset Battery Charging)
Difficulty in Placing or Receiving Calls:
• Move closer to the base and
try again.
• If moving closer does not work, you
may have lost the security code.
• Reset code by placing the handset
back on the base for 5-10 seconds.
(See Security Code Section)
• Make sure you have selected the
correct dialing mode, tone or pulse.
PM080404_C440_RevB_E#34CA7F.qxd 8/14/04 15:08 Page 27