Clarity 440 - Manual (Page 13)

Setting MESSAGE WAITING ON/OFF
1. After setting Voicemail No, press UP (
▲ )
button to set Message Waiting function
on/off.
2. The LCD display will show MESSAGE,
WAITING, and 1.ON 2.OFF with a
tick mark against the selected item.
3. Press 1 or 2 button to change
the mode.
4. Press the UP ( ▲ ) or DOWN (
▼
) button
to go to the next menu.
Setting AUTOCONNECT ON/OFF
1. After setting Message Waiting Light Off,
press UP ( ▲ ) button to set AUTOCON-
NECT ON/OFF (default to ON).
2. The LCD display will show AUTOCON-
NECT, 1.ON 2.OFF.
3. Press 1 or 2 to change or current
selected value. The tick mark will move
against the selected value.
4. Press the UP ( ▲ ) or DOWN (
▼
) button
to go to the next menu.
Feature Set-up
Setting LDS CODE
1. After setting Area Code 2, press UP(
▲ )
button to set LDS Code.
2. The LCD display will show LDS CODE
and X with X digit blinking.
3. Enter the LDS number using the numeric
keys on the handset.
4. Press the UP( ▲ ) or DOWN (
▼
) button
to go to the next menu.
Setting EASY MODE
1. After setting LDS Code, press UP (
▲ )
button to set the Easy Mode.
2. The LCD display will show EASY
MODE and 1.ON 2.OFF.
3. Press 1 or 2 to change the mode.
The tick mark will move against the
selected mode.
4. Press the UP ( ▲ ) or DOWN (
▼
) button
to change the mode.
Setting VOICEMAIL NO
1. After setting Easy Mode, press UP(
▲ )
button to set VOICEMAIL Number.
2. The LCD display will show VOICEMAIL
NO and XXX-XXX-XXXX with the last
digit blinking.
3. Enter the voicemail number using the
numeric keys on the handset. Press
DEL/CH key to delete and move cursor
back one place.
4. Press the UP ( ▲ ) or DOWN (
▼
) button
to go to the next menu.
E
N
G
L
I
S
H
13
PM080404_C440_RevB_E#34CA7F.qxd 8/14/04 15:08 Page 13